Motion Pro Pivot Suspension Vise

Details

• Designed to make suspension service simple and quick.
• Holds shocks and forks securely while you change oil, re-valve, or change seals.
• Pivoting head holds parts in any position, with mechanical stops every 45 degrees.
• Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system.
• Large side holds 39 mm to 69 mm diameter parts.
• Small side holds 14 mm to 39 mm diameter parts.
• Steel Frame is rigid yet has a small footprint, with 4 pre-drilled holes in the base for secure mounting to a bench.
• Movable fluid catch pan with mesh insert, and threaded drain bung.
  
  How it works on forks:
• Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip.
• Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements.
• Can be used to assist in removing compression valve assembly (use of stock front axle required).
  
  How it works on shocks:
• Holds shock firmly around shock body, shaft or shock reservoir.
• Facilitates removal of piston rod and seal head.
• Facilitates removal of shock reservoir caps, chamber pistons or bladder.
• Holds shock to remove spherical bearings or needle bearings.
• Holds shocks for removal of shock spring.