To give our customers the best shopping experience, our website uses cookies.  Learn More

Body

You are viewing a combination of machine-specific and universal parts. Please choose a machine to display parts specific to your machine or select a part below.

Choose a machine

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

Use one of my Saved Machines

Body

Body

Latest Body Reviews – You could win up to $500 for reviewing products!

  • Ricochet Offroad Skid Plate

    Wesley in NY

    Set aside some time to fit it properly to an '06 TT...

    I don't even know where to begin with this one. I had so many issues with this plate when installing it on my son's 2006 TTR 125. I thought it would be a 20 minute job. Ended up being a 2 1/2 hour job. Here goes............ The back 2 mounting surfaces did not touch the frame where they were supposed to (at the bolt holes). Instead, the plate was bottoming out first on the very back of the plate on the frame cross member. So, I had to make 2 spacers to have the plate contact the mounting surface at the 2 bolts. When I did this, the supplied bolts were short, so I had to run to the hardware store to get 2 more bolts. Went from a Torx (supplied with the plate) to an allen head screw. I don't know who came up with the idea of an allen head screw, but they are terrible and should be designed out of ever fastener on the entire planet! It might as well be circle. Allen heads are so easy to strip. Torx is a 1000 times better design! Anyway, I used some Loctite to keep them in. Next....... The front mounting slots on the plate were off when the plate was mounted flush against the frame. I had to open up the slots with a Dremel tool to get the bolts to install properly. Ahhhh....... and another. The "L" shaped brackets were hitting a folded stamped steel piece on the frame and would not fit flush against it, so I had to notch them. Argh........... More? Yup. 1 of the bolts on the front of the plate was so long it didn't allow me to access the cross through bolt to tighten it with a socket. So, I had to cut it shorter. (at least I didn't have to go to the hardware store again and buy another bolt! ) Seriously.........what else could there be?? When I finally got all this squared away, the plate was hitting the starter, not allowing it to mount flush to the frame. I dug through my plethora of steel scraps and was able to find a large steel ball and a cup. With these 2 items, I was able to use my hydraulic press to deform the plate to clear the starter. I will say, the plate is robust and should do a nice job protecting the underside of the bike versus the extremely cheap and flimsy OEM plastic/rubber one that was on there. I destroyed the OEM one going over a log. I guess the engineers from Ricochet never installed this plate onto a '06 TTR 125!! In the end, I had a nice fitting skid plate! Ha, piece of cake...... Believe it or not, I would recommend this skid plate even after everything I went through.

    Read All Reviews
  • Acerbis Lower Fork Cover Set

    Timothy in FL

    Quality Part From Acerbis.

    Replaced my OEM fork guards with a set of these. Fit perfect and they were reasonably priced. Will buy again in the future.

    Read All Reviews
  • Acerbis Full Plastic Kit

    Chase in MA

    Good plastic, bad airbox cover fitment

    Quality of the plastic is way better than stock ktm. Fixes the stupid floppy fender issue I was having. Only reason I wouldn’t Give it 5 stars is the air box cover fitment is absolutely garbage. The pins are about 1/2 inch off, and I can’t even screw it in because those holes don’t like up either. This causes the cover to awkwardly bow out. If you have a 15 ktm trash the Airbox cover once you get it. The rest of the plastics are absolutely perfect and I love them

    Read All Reviews
  • Enduro Engineering Skid Plate

    Gary in BC

    Great product, well built and engineered. Don't hes...

    As with all Enduro Engineering products it is excellent quality. I have used nothing else on both my bikes. I have skid plates on both bikes and on the YZ full rad cages and guards.

    Read All Reviews
  • Kawasaki OEM Engine Guard

    James in OK

    Lightweight, vented with oil drain plug accessibility

    Very minimalistic but rigid and protective...like that it bolts right up to existing frame holes on the 2021 KXF450 with bolts included! Still have to use stock water pump guard...this skid plate provides Zero side cases protection. But is lightweight, vented and oil change compatible...for the price it’s hard to beat.

    Read All Reviews
  • Polisport Side Panel Graphic Guards

    James in OK

    Save your graphics

    The guards fit perfectly but highly advise drilling a couple of extra holes to cinch down with zip ties. My knee braces shred graphics and these guards help but if I did not secure the guards to my side panels with zip ties they would have surely snapped off due to the abusive nature of my braces rubbing / gripping the bike.

    Read All Reviews
RM Cash ProgramParts Finder