To give our customers the best shopping experience, our website uses cookies.  Learn More

dirt bike Handlebars & Controls

You are viewing a combination of machine-specific and universal parts. Please choose a machine to display parts specific to your machine or select a part below.

Choose a machine

User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.

Use one of my Saved Machines

Latest Hand Controls Reviews – You could win up to $500 for reviewing products!

  • Fasst Flexx 1 1/8" Handlebar

    Joshua in PA

    I cannot tell a single difference between these and...

    **I BOUGHT THESE FROM THE MANUFACTURER DIRECTLY, NOT RM.** I bought these specifically to reduce fatigue and arm-pump, and they have honestly not helped with either. I have about 10 hours on them so maybe my opinion could change but I cannot feel any sort of give or shock absorption in these handlebars. I have tried all of the polymers and am currently running the softest possible polymers with only 2 threads showing instead of 3 on the adjustment nut to give it more give and even STILL I think these bars have an extremely harsh feel to them. They feel absolutely no different then the stock 1 1/8" renthal bars that came on my 2013 KTM300XC. I wanted to like these bars so much because of how harshly I suffer from arm-pump (it's my fault because I took a 4 year hiatus from riding) but I even bought the anti-vibration inserts and I notice the SLIGHTEST decrease in vibration with the combo of the 2 products, overall its still very prevalent. Like I said before, I've tried every combo of the polymers and I actually can't tell a difference between any of them. They all feel the exact same. I had 1.5 hours on the stiff ones, 1.5 hours on the medium compound, and currently have 7 hours on the soft ones. They don't feel worse then the stock handlebars, but for over $500 spent on the setup, I should be able to say a little more then "it's not worse". HUGE disappointment.

    Read All Reviews
  • Tusk Brake Lever

    Connor in ID

    Would not recommend

    I haven't had a problem with then brake lever yet but the clutch lever snapped first ride put setting it up against the treen would not recommend feel like cheep Chinese garabe

    Read All Reviews
  • Tusk Clutch Lever

    Connor in ID

    wouldn't Recommend

    They Looked like decent levers but they didn't hold up to great the fit great and worked just like they should but went riding once a busted it setting it up against the tree but iff you are just using out to ride around the house I wouldn't worry to much ut if you have chance of falling wouldn't recommend

    Read All Reviews
  • Odi V2 Emig MX Lock-On Grips

    Bryan in AZ

    Review for installation on CRF only

    2006 CRF450r. Beware, B Cam for CRF is 1.5mm larger in diameter than stock. Save yourself some grief by screwing in the cable adjusters all the way first thing before you begin. I also had to at carburetor requiring removal of tank. If you don't you risk the throttle sticking. Difficult twisting throttle is clue that the cables are too tight. Haven't ridden yet so can't comment on feel or performance. BTW the cam isn't indexed to the tube, so if you have to change cams, mark position on tube or the EMIG likely will be pointing in wrong direction and you get to do it all over again, and again, and again. All good now after adjusting. They look cool IMO.

    Read All Reviews
  • Tusk Universal Big Bar Clamp Kit

    Jesse in FL

    Garbage mounting hardware

    I tried to install these on my DR650 but the bolts that mount the adapter to your stock handlebar mounts are trash. The thread pitch is slightly off compared to the M8 x 1.25 that they're supposed to be. I tried screwing them in on two different bikes and tried threading them into a thread gauge at the hardware store but they just don't thread in nicely. They'll start to go in okay by hand for the first few turns, then they get progressively tighter. At first I thought it was just the thread locker they apply on the bolt, but after one of the heads stripped off in my stock bar mounts I found out that wasn't the case. Now I'm stuck buying new bar mounts anyways. I could've saved myself the trouble and bought oversize mounts off the hop instead of messing with these adapters. These might be okay if you throw out the bolts they include and buy some proper ones from the hardware store.

    Read All Reviews
  • Fastway 2" Handlebar Risers

    KEITH in WA

    Poor quality

    Was very disappointed when the bolts bent from bike just falling over on the trail. Was a perfect height too

    Read All Reviews
RM Cash ProgramParts Finder