Renthal Grip Glue

This glue gives you time to put your grips on without drying. It sets up really strong, and I've never had a problem with pro taper or renthal grips turning. Just make sure you give it the proper time to cure before riding.

Only glue to use with Renthal grips and no need to wire them. Can’t use other glues with these grips or they will deteriorate

Easy to work with and works great as long as you give it plenty of curing time. I also recommend wiring your grips just in case!

-m-2017 HONDA CRF450R--

Works great, super strong. Doesn’t dry instantly like others. Allows you time to work the grip on and get into the correct placement.

-m-2016 KAWASAKI KX100--

If you need it it won’t stick around long. Buy two bottles

It does the job well. Holds my grips perfectly. Comes in a small tube which stores easily in the toolbox. It smells a little funny, so don't sniff it.

-m-2018 HONDA CRF450R--

Easy to use. Enough set time to get the grips properly positioned. No overwhelming fumes. A must have, if using Renthal grips. I don't like safety wire on my grips, and this glue keeps my grips on without it.

works great and great value

-m-2006 HONDA CRF450X--

I used this Glue for the first time when I replaced my old worn Hand grips. It makes installation so much easier. Clean the handle bar and smear on and slip the grips on, and clean up excess and done !! Not much faster and easier than that.

-m-2003 YAMAHA GRIZZLY 660 4x4--

Glue works really good haven't had any problems with grips coming loose

I prefer this grip glue over the other stuff Renthal and the other companies have, because it doesn't set so fast. It makes it much easier to work with and slide on. The only downside is that it's not something you can throw on and go riding an hour later, it's got to set for a while, but if you're not pressed for time and can throw your grips on the night before you plan on riding, this is without a doubt what you're looking for!

Grip glue works pretty good with any grips and has never seemed to break the grip loose at all.

Helps slide grips on easier. Use on mine and son quads and dirtbikes.

I will not use anything else but this glue...100% satisfied

Good glue if applied liberally and safety wired right away, normally let the bike sit at least overnight for a full cure. Have not had any problems with grips rotating using the glue and the wire but if you are looking for instant adhesion results look elsewhere.

Spend the extra money on good grip glue. Next time I will buy the most expensive. I cleaned up my already pretty clean bars, and put the grips in place. Didn't touch them at all, for the entire week. That weekend up north they were moving around about 1/4 of a turn. Not too happy with this product.

you dont have to be a speed demon to use this glue. it works and even holds up to kids. if your using special grips and want them to look the same you can spin them and work them exactly where you want them. and in about 10 mins your good.

buy this product!!!

and buy it from the nicest people at rockymountain

Sticks like glue.

These keep your grips on your handlebars quite well!

I have been using contact cement for years. Decided to try this. How easy is this- put it on the bar, put the grip on, let it dry overnight and all done. We use safety wire just in case but no more grips getting loose. Well worth the money.

This glue is extremely strong. Once the grips are set they are locked in place on your bars. Application can be messy but as long as you take your time it is very easy to work with.

works great. holds up for the life of the grip and makes installation easy. use a air compressor, makes life easier!

Works ok, but I can't seem to get my left hand grip to stay in place no matter what I use.

obviously wire tie as well but they arn't spinning

Renthal is the clear choice for value and durability in any Control application. Not to mention they always look Awesome!

Great glue if you are using renthal grips. If you are using pro taper grips do not buy this glue. I have tried it with 2 different kinds of pro taper grips and somehow the glue eats through the grips and gets everywhere. Again works great if you are using renthal grips.

this is a good product, kinda not happy that you have to use it for the Kevlar grips,

Great fit easy to install!!

works good never had a grip fly off

Ive always used renthal grip glue its the best

hold them grips on like you wouldnt believe, doesnt wear out either, always run this on a new set and have yet to get throttle grip

With the wires and the glue no slipping. Make it super easy to slide the grips on the bars.

Supposedly you need this for the Renthal Dual Compound grips and that may be true. I used it on a pair of Domino grips and they came loose after a few rides.
TECH NOTE: FOR USE WITH RENTHAL BRAND GRIPS

It's glue for Renthal grips.

Wish it came in a better bottle like the pro taper stuff. And that it was cheaper. And for free beer.

Used this with safety wire for years. No slipping. Gets 4 stars because it could be a dollar cheaper.

This is the only grip glue I have used that actually keeps the grips on for more than 1 ride. Comes with plenty in the tube to do 2 sets of grips.

I have always been a Renthal fan and have always used their grips and other products for years. I was told that renthal dual compound grips needed renthal grip glue because other glues would eat away at the grip itself. So on my first use my throttle grip slid right off the next morning, second attempt I used super glue an it held great but that day I crashed and bent my bars. So I got twinwalls the next day and a new set of grips with renthals grip glue. Third attempt both grips spin even with wire on them...... I'll never use this glue again. I'm no rookie either I've been doing my own wrenching and numerous pairs of grips for years now. Renthal you can do better.

I used the Renthal glue with some new Renthal grips. The glue does not seem to hold as well as other brands I have tried; even when used in conjunction with wire. The grips twisted while riding.

Works good a bit expensive though

Works good with Renthal grips

works fine, it's just glue. On the Renthal grip packaging it says you need this glue but any glue does work for them

Keeps the grips on the bike....but makes it a little difficult when changing grips the next time.

Better than hair spray

Haven't had a grip come loose with this and safety wire.

I've had no issues with this glue. Other glue works, too. Heck, even black or clear spray paint will effectively hold grips on!

only used a 1/3 glue for both of my new renthal grips on my new renthal handlebars and have no movement yet. i still have enough to redo or when grips wear out. pleased.

a must for glueing your renthal grips on

Great Product. Always works great when I'm swapping grips on my TrailTech X-Bars.

I like this glue the best if you have time to let it setup over night. I like that if you bend the bars or need to switch out a grip for some reason, you can spin off the grip and use it again. It still sticks good you can just re use the grip if needed which is nice.