You are viewing a combination of machine-specific and universal parts. Please choose a machine to display parts specific to your machine or select a part below.
User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.
JASON in UT
We have several original style, for full sized bikes, and needed plates to mount with quick release in enclosed trailer. With a variety of big & small bikes to load, and taking different bikes at different times, it's not quite as easy to make decisions in trailer for mounting the plates. So we've started with two, and will add 2-3 more, leaving space for smaller bikes. We do have 3 bikes that are smaller full size (GPX fse250s) that have a wider, air cooled 4 stroke, that is too wide to load forward. So we've had to adjust mounts to allow backing in those bikes, like you would do with 2 stroke with pipe. Takes a little while to make decisions for different bikes/needs, but once installed, the quick release is great, allowing the bulky mounts to be removed and installed easily.Read All Reviews
Walter in VA
I have fitment issues on my Honda Ridgeline 2017. The thru hole on the receiver is very close/forward to the receiver collar. Therefore the fixing bolt (3/4 inch) used to secure the hitch CANNOT be tightened as the collar obstructs the outside edges of the bolt. I had to grind away @3mm of the collar so the bolt would property tighten. This also only allows 3 1/2 inches of the hitch to be inside the receiver. My One-Up bicycle rack has a much better fitting/locking system. By the time I figured this all out, too late to box up and send back. The hitch itself is well made and on the right truck should serve you well.Read All Reviews