To give our customers the best shopping experience, our website uses cookies.  Learn More

Polisport MMX Headlight

Polisport MMX Headlight
  • View Larger
  • 2004 CR Red
  • Black
  • KTM Orange
  • White
  • YZ Blue

Polisport MMX Headlight

Our Price: $49.99

MSRP: $73.95 - You save up to $23.96 (32% off)

View Product Details

Select options above to check availability

Live Help
  • "Customer service is priority #1 at Rocky Mountain ATV/MC. We value our customers and strive to be the best shopping experience- when you buy from us, you are buying lifetime service."

    -Dan Thomas, CEO and Founder

  • Returns

    We take pride in offering no hassle returns. In the event of a return, please call, email or chat with us to receive a solution to the problem. For apparel that doesn't fit quite right, Click here to see our Fit Guaranteed Program.

  • Warranties

    We will stand behind all products we sell with regards to manufacturing defects in workmanship and material. Most products are limited to the manufacturer's warranty. However, we will do everything in our power to take care of the problem.

  • Have questions?

    Live Help (Leave email if after hours)
    Email: [email protected]
    Call us: 1 800 336-5437
    7am-7pm Mon-Fri 8am-4pm Sat (Mountain Time)

Details

    If you're looking for a great headlight, check out the Polisport MMX. It features a simple yet attractive design for a headlight, and it functions excellently. It features a universal fit for bikes with existing headlights, but it will also work with many bikes that don't already have a headlight (may need a lighting stator and regulator).
  • The Polisport MMX features a universal fitment for motorcycles with existing headlights. (Motorcycles not equipped with a headlight may need a lighting stator and regulator.) Minor wiring required for installation.
  • The headlight meets CE and DOT standards.
  • High-impact lens, antivibration rubber straps and headlight extensions are included.
  • High/low 12V 35W/35W headlamp bulb, and 12V 4W running 3rd light.

Polisport MMX Headlight Reviews

Rocky Mountain ATV/MC gift card Each review submitted enters you into a
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
WRITE A REVIEW
Powered by TurnTo
4.2 / 5.0
47 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
20
19
6
0
2
Value
4.4 / 5
Durability
4.1 / 5
Ease of Installation
4.6 / 5
Fitment
4.4 / 5
Visibility
3.7 / 5
Recommend it?
Yes (18)
No (3)
Value
4 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Fitment
4 / 5
Visibility
4 / 5
Recommend it?
Yes
Good durability
I put in on my wifes crf230f and it fit and works well. The only thing I needed to do was to put a couple shims under the upper 2 rubber clamps to aim the light down more then it would adjust.
January 3, 2020
Santa Clarita, CA, US
Purchased
 over 5 years ago
Value
4 / 5
Durability
4 / 5
Ease of Installation
4 / 5
Fitment
3 / 5
Visibility
4 / 5
Recommend it?
Yes
-m-2001 HONDA XR650R--easily installed fitting all accessories behind it was easy
December 30, 2019
Athabasca , AB, CA
Age: 45-64
Purchased
 2 months ago
Gender:
Male
Weight:
221 - 250 lbs.
Height:
5'10 - 6'0
Value
5 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Fitment
5 / 5
Visibility
3 / 5
Recommend it?
Yes
Overall good headlight
Headlight does what it’s supposed to do, headlight bulb could be a little brighter from factory. Could use a grommet on the backside so the light coming through the crack won’t blind you while driving.
Headlight installed on my TPC 450 3 wheeler
Headlight installed on my TPC 450 3 wheeler
August 13, 2019
Lamesa, TX, US
Purchased
 7 months ago
Value
5 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Fitment
5 / 5
Visibility
3 / 5
Recommend it?
Yes
Great for off-road
Very easy to install. The wiring diagram was simple to follow.

-m-2017 HONDA CRF450X--
User submitted image
Added Aug 9, 2019
August 9, 2019
Royse City, TX, US
Age: 25-44
Purchased
 7 months ago
Gender:
Male
Value
5 / 5
Durability
5 / 5
Ease of Installation
4 / 5
Fitment
3 / 5
Visibility
4 / 5
Recommend it?
Yes
It gets the job done!
For a riding trip to ColoradoI needed to put a headlight and a taillight on my 2018 KTM 300XC to be pseudo street legal so we could ride a few miles of road to tie trail systems together. This did the trick. It is very much not a snap to fit affair and you have to do your own wiring and the fit is far from perfect (compared to the KTM brand light) but the cost is was much, much lower! Amazingly I found the special Molex connectors needed to do the wiring perfectly at an Ace Hardware.

-m-2018 KTM 300 XC--
August 1, 2019
New Port Richey, FL, US
Age: 45-64
Purchased
 7 months ago
Gender:
Male
Weight:
191 - 220 lbs.
Height:
5'10 - 6'0
Value
5 / 5
Durability
4 / 5
Ease of Installation
5 / 5
Fitment
4 / 5
Visibility
3 / 5
Recommend it?
Yes
Good value aftermarket headlight for XR200R
I bought this to equip a 1991 XR200R with front lighting. It was easy to install after I assembled a wiring harness to connect to the Trail Tech voltage regulator. The light output looks good on the medium connection to the bulb. Th only negative is that you get a lot of light coming from the back side of lamp and housing. This could be dangerously annoying at night. I placed a strip of Gorilla tape in the area from which the light was "leaking". I have not ridden a night yet but in daylight the coverage seems OK.

-m-1991 HONDA XR200R--
June 15, 2019
Glenwood, NM, US
Age: 65+
Purchased
 8 months ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
6'1 - 6'3
Value
3 / 5
Durability
3 / 5
Ease of Installation
4 / 5
Fitment
4 / 5
Visibility
4 / 5
Recommend it?
No
Go LED
this isn't really what i wanted but settled for, also ended up using a tusk battery to charge this on my 05 yz250f and had to do some different wiring to make it work

-m-2005 YAMAHA YZ250F--
May 28, 2019
Wenatchee, WA, US
Age: 25-44
Purchased
 over 2 years ago
Gender:
Male
Weight:
191 - 220 lbs.
Height:
6'4 - 6'6
Value
4 / 5
Durability
4 / 5
Ease of Installation
5 / 5
Fitment
4 / 5
Visibility
4 / 5
Recommend it?
Yes
Works great and simple to install as it uses rubber straps to hold onto the forks. Can put it on pretty much any bike.
March 15, 2019
Lynden, WA, US
Age: 25-44
Purchased
 1 year ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'10 - 6'0
Value
2 / 5
Durability
1 / 5
Ease of Installation
5 / 5
Fitment
4 / 5
Visibility
1 / 5
Recommend it?
No
Bad light
There is a good reason this is fhe cheapest polisport light. Its ok if you just need a light to be legal but don't think you’re gonna be able to ride at night safely with jt. Super dim, the bulb went out quickly, and its a stupid hard to find bulb.

My advice; try something that uses LED or a standard bulb like H4.

-m-1996 HONDA XR600R--
February 13, 2019
Manhattan, KS, US
Purchased
 1 year ago
Value
5 / 5
Durability
5 / 5
Ease of Installation
5 / 5
Fitment
5 / 5
Visibility
5 / 5
Recommend it?
Yes
Looks and functions great
Light weight and brite.
Didnt come with pigtail and does require more than on off switch.

-m-1989 KTM 250 DXC--
January 30, 2019
Gold Run, CA, US
Age: 45-64
Purchased
 1 year ago
Gender:
Male
Weight:
161 - 190 lbs.
Height:
5'7 - 5'9
Show more
Rocky Mountain ATV/MC gift card Each question or answer submitted enters you into a:
$100 gift card monthly drawing and a
$500 gift card quarterly drawing!
Powered by TurnTo
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 39 questions Browse 39 questions and 116 answers
How can I power this headlight to my yz 250f without doing a stator or alternator modification?
MIKE on Sep 9, 2016
BEST ANSWER: No, your stock stator does not produce enough power to run a headlight.
Does this use an H4 bulb?
Suzy M on Sep 18, 2016
BEST ANSWER: NO....it is a proprietary bulb. I liked the look but the bulbs burned out fast, were hard to find and very expensive. I converted it to LED but had to modify the housing.
will this fit / work with a 2017 TTR 125?
cody b on Aug 12, 2018
Polisport MMX Headlight
Polisport MMX Headlight
Tusk Motorcycle Enduro Lighting Kit
Tusk Motorcycle Enduro Lighting Kit
BEST ANSWER: With the tusk battery pack, you could install this kit on just about any bike. i am 99% certain this would fit on you 2017 ttr. This kit fit on my 2015 yz250fx flawlessly. if your TTR has electric start, with a battery, you will not need the tusk battery pack.
How do I wire these bulbs, there is no diagram?
ERIC Y on Apr 1, 2018
BEST ANSWER: If your bike has a battery and light switch, there should be two wires feeding from the switch up to the front of the bike. Hook up the + (Red) line from the headlight assembly to the + switch line and -(Black) to the ground line from the switch or anywhere you can access a ground point.
What are the dimensions of just the lamp assembly removed from the plastic shroud?
Doug S on Sep 27, 2016
BEST ANSWER: The lens is approximately 2 3/4" x 5".
What is included to mount the light?
A shopper on Jul 15, 2017
BEST ANSWER: It comes with traditional dirtbike headlight mounting hardware. There are 2 flanges on the headlight with 4 neoprene rubberlock supports. You pull them tight around the forks (2 per side) and lock them in place. It also comes with plastic pieces to extend the flanges if more room is required.
does this fit a 2001 suzuki drz 400?
Kenny A on Jun 4, 2019
BEST ANSWER: It should. It has rubber bands that go around the forks,so its pretty much a universal mount. May need to do some minor wiring on connectors.
In the picture of the KTM above, it looks like there are flat sides, is there room to mount turn signals there?
KEVIN M on Jul 8, 2018
BEST ANSWER: It comes with a couple of different spacers/brackets but even,with the lowest ones it should clear turn signals fine.
I have a 2014 crf 1125 and was wondering in the stock stator creates enough power to power the enduro lighting kit and a headlight?
Grant C on Oct 13, 2016
Polisport MMX Headlight
Polisport MMX Headlight
Tusk Motorcycle Enduro Lighting Kit
Tusk Motorcycle Enduro Lighting Kit
BEST ANSWER: I have a 2005 crf450x and i changed out the headlight with one that has a high and low and my stock stator was fine
how do i hook this up to the tusk enduro lighting kit it has only blue black and whit wire from the wire harness provided?
A shopper on Jul 21, 2018
Polisport MMX Headlight
Polisport MMX Headlight
Tusk Motorcycle Enduro Lighting Kit with Handguard Turn Signals
Tusk Motorcycle Enduro Lighting Kit with Handguard Turn Signals
BEST ANSWER: It's been a while since I did the headlite and lighting kit. I did rewire my stator according to a YouTube video ii found online so it would recharge the battery..I also changes the headline bulb to an led to consume less power so the battery never discharged when the motor was running. It was a simple resolder of 2wires. Since the kit has no ground to the chassis as is the way the kit comes, its supposed to run all grounds back to the batrery..so with an aftermarket headline, if you run the ground to the chassis and power to the tiny battery supplied it wont work.. you either need to run the headline ground wire back to the battery or make the entire chassis a ground (like I did) and ground the battery ground wire and the stator and the headlite wire to ground and you will get a complete circuit..hope this help. Rmatv tech line also helped as my headlite wouldnt work either 1st try.
Will this fit my ktm 250 sx f 2018 ?
William J on Feb 5, 2019
BEST ANSWER: This is a universal headlight, they mount to the fork tubes with rubber straps. So, yes it will fit. The other question is does your bike create the needed 12v to run the headlight or are you going to use a battery as a substitute? Most mx bikes do not create enough power to run a headlight.
Will this fit on a 2013 Husqvarna tc250?
A shopper on Oct 22, 2018
BEST ANSWER: Yes it will fit. I switch mine back and forth from a 2012 KTM 250xc, and 2017 KTM 250xcf. Mounting is 4 rubber straps that wrap around the Fork tubes.
Does it come with wires to connect it?
A shopper on Sep 4, 2018
BEST ANSWER: If you buy the complete harness kit it comes with wiring, however, the wiring kit does not match the headlight, or handle bar controls. I bought the complete system including blinkers, but, I have to redo the wiring to make it work. The horn and rear tail light / brake light work at least. Nice kit, just need to be able to use a multimeter and check continuity, and be able to solder. Hope this helps
Does this come with a switch? Also wll this work on my 1987 husqvarna 430. I have a single wire for "lighting ".
Michael A on Jun 25, 2018
BEST ANSWER: The light does not come with the switch and I don’t know if it will work with one wire . The bulb has high and low beam
Do you have to have existing lights?
Mark R on May 28, 2017
Polisport MMX Headlight
Polisport MMX Headlight
Tusk Motorcycle Enduro Lighting Kit
Tusk Motorcycle Enduro Lighting Kit
BEST ANSWER: You need to have front and rear light as this will have the bike equipped with a charging system. If you are wanting for a bike that is full on dirt bike you need to get another kit that includes front and rear light and a battery system. They come with a battery that you charge after riding. Hope this helps
Can you use a battery pack to power this light? If you can what kind? If you can't what kind of lighting stator would you recommend on a 2017 ttr 230?
A shopper on Apr 12, 2017
BEST ANSWER: I put this on my TTR230 and routed it straight to the battery, then mounted a toggle switch by the handlebars from the battery. Works awesome!!
what kind of stator conversions need to be made so that a yz 450f can power the head light? Is there another way to power the head light even if a rechargeable battery is needed such is the Tusk Enduro Lighting Kit Replacement Lithium Battery Pack with Charger? So basically can you buy a tusk battery one for the head light and one for the rest, turn signals, tail light, etc. Which is option is better for the tusk compact control switch, the stator route or extra rechargeable battery options?
Carlos A on Feb 13, 2017
BEST ANSWER: If you intend to run it on batteries alone do not use Lithium. Lithium will get damaged from deep discharges. It is your choice... adapt the stator... or use a isolated battery that does not get charged by the bike and recharge the battery after you use the light. Buy a standard good quality wet cell motorcycle battery for this. It can tolerate getting drained much better. Lithium and AGM batteries will fail rapidly if drained past their safe voltage repeatedly.
will it fit a 2008 crf150r and will it still activate without buying a better stator or an alternator?
A shopper on Dec 6, 2019
BEST ANSWER: I would think so as this is only a 30w bulb (I believe). Check bikes stator output and operating system consumption to see how much extra you have. This set up is really dim and I was disappointed.
That being said, there are bulb upgrades available, check the bulb model to make sure you have a proper fit.
will this work on a 2019 yz 450f bike has e start and a full battery setup?
George M on Jun 14, 2019
Polisport MMX Headlight
Polisport MMX Headlight
Tusk Motorcycle Enduro Lighting Kit
Tusk Motorcycle Enduro Lighting Kit
BEST ANSWER: It will work but you may have to upgrade your stator. The high and low beam draw 35 watts I believe. My stock 17 crf450rx did not need a stator upgrade to run this set up. Hope this helps
Will that work on KDX 200?
A shopper on Nov 27, 2018
BEST ANSWER: If your KDX has an existing headlight, it will work or at least the old wiring harness in place. If your bike has a 3 way switch (off,low, high beam) even better. This light has high, low and always on running light if you chose and wire it for that. I have one and it works great.
I have a 2005 Wr450F and I have this kit and I needed to replace the head light and when I tried to hook it up everything stopped working. the turn signals ,horn and trail lights stopped working when before they all worked fine . I'm not sure if I touched some wires together or what but I'm lost on what to do . The battery isn't dead because my electric start still works fine . What should I do ? new wiring harness ?
Nathaniel G on Aug 9, 2018
Polisport MMX Headlight
Polisport MMX Headlight
Tusk Motorcycle Enduro Lighting Kit
Tusk Motorcycle Enduro Lighting Kit
BEST ANSWER: Sounds like you may have disconnected your ground, 12 volt supply or blown a fuse. Best bet is to check your power (12 Volt) at each supplied accessory (Horn, signals, lights) if there is no voltage at the 12 volt supply wire then you have an open some where, either ground, fuse or detached 12 volt supply.
can i install this headlight on a XR/CRF 100?? i will be adding a stator but i want to know if i can add the head light.
Diego on Apr 25, 2017
BEST ANSWER: It can be mounted, but the stator will not have enough watt output to make the light work properly! This system works best with a 12 volt supply. An LED setup would be better.
Can I replace a 2007 klr650 headlight assembly with this universal Polisport Mx headlight? I’m also removing the odometer assembly.
A shopper on Jan 11, 2020
BEST ANSWER: I purchased the same Polisport mx headlight. However, I put it on my Kx250f. What i can tell you is the Polisport has two universal straps that easily wrap around fork tubes. comes with a plastic bracket that allows you to mount Polisport close or farther away from fork tubes (making room for wiring and ignition box. the kxf has a cdi mounted on steering tube). I am not familiar with the stock Klr 650 set up, but this polisport is pretty universal. also not sure about plugging in electronics to headlight. I hope some of this info helps.?
Would the lighting kit, battery kit, and head light fit on a 2001 yz125?
A shopper on Nov 23, 2019
BEST ANSWER: Yeah it’ll fit virtually any bike with slight modification to the harness. I would advise getting a LED light for two reasons, longer runtime. Second it’s brighter. This one has a halogen bulb and it really needs a/c current in order to illuminate. Since you don’t have a stator wired to charge a battery you won’t have the full potential of the bulb... LEDS are the way to go for a parasitic draw lighting system. Cheers
2015 YZ125 if I purchase the headlight & just battery kit will I be able to use the headlight. ? I’m trying to only use the headlight none of the signals or brake lights
A shopper on Nov 14, 2019
BEST ANSWER: Yes should mount up correct and just have a switch to turn on and off the light
I have 2019 CRF230F, I want to power this headlight with a battery pack? Not really worried about longevity just need it to pass Viriginia state inspection. Any recommendations?
A shopper on Oct 5, 2019
BEST ANSWER: Get the tusk battery pack w/ charger and that’ll work. I actually found a better solution, the only difficulty was getting the right height but I used a rechargeable flood flash light with about 1200 lumens. Runtime is about 6 hours on one charge. I gutted it and made mount to a number plate and bingo. This light you need a stator for it to be bright. I may have gave more info than you wanted but the Tusk charger and battery pack for about $60 should do the trick with minor modification
is this water proof ? If i ride in the rain will it break?
Dominick J on Sep 12, 2019
BEST ANSWER: I have lots of miles in the rain with no problems
Will this kit work on a Yamaha TTR230 running the enduro kit and headlight?
Eli B on May 4, 2019
Polisport MMX Headlight
Polisport MMX Headlight
Tusk Motorcycle Enduro Lighting Kit with Handguard Turn Signals
Tusk Motorcycle Enduro Lighting Kit with Handguard Turn Signals
BEST ANSWER: You will have to figure out your wiring, but it should be easy. I have use this kit for a 2004 Honda XR 650 R and a 1993 ATK 406 without problem.
Does this come with everything I need to make it work , or do I need to order a wiring / switch etc ? I have a 1997 XR400 that had a light previously (broken assembly and light in accident)
Neal w on Sep 29, 2018
BEST ANSWER: It wont come with handle bar controls. Youll need those. The Tusk legal lighting kit comes with em along with signals horn,mirror,etc. Easy color schematics and full witing harness.
Will this plug into the tusk lighting kits? And will I be able to use the switch that comes with the kit?
Kennith K on Sep 21, 2017
BEST ANSWER: The switch will work but the connectors are slightly different. You would either need to purchase a separate connector or you could just tie the wires together. There is a video that we have under the Tusk Compact Control Switch on our website that shows how you can do that.
RM Cash ProgramParts Finder