You are viewing a combination of machine-specific and universal parts. Please choose a machine to display parts specific to your machine or select a part below.
User Tip: If you're unsure of your vehicle type, you may skip the machine type selection box.
BRET in CO
In the past, I have had the IMS 3.2 gallon tanks. Those fit with no issues. However, this Clarke version was a royal PITA to fit. The petcock position needs to be turned 90 degrees to fit the hose easily to the carb. As is, the hose must bend very tightly. I tried several ideas, but finally used some Motion Pro hose I had that would make the bend without kinking. The next issue is fitment of the kick starter lever into the gap provided on the tank. Regardless of how I adjusted the lever position, it did not fit seamlessly. It works, but should be better designed for a seamless fit of the lever into the slot on the tank. Fitment of the seat once the tank is installed was another issue. I had to make adjustments to the seat brackets to get it to fit at the rear where the seat bolts go in. You'll note I made no evaluation of the durability. My tank came with what appears to be a gouge in the area where the petcock mounts. I check it for leaks with water, but had yet to put fuel in it or ride it with the tank. So, if that turns out to be a crack and leaks, I'll be sending this tank back for a refund and by an IMS instead.Read All Reviews
daniel in TX
Finally installed the tank yesterday. It doesn’t leak so thumbs up. The install instructions are poor. The bumpers that hold the front of the tank in place fit poorly. The plastics don’t fit on the tank well. Taking them on and off will forever suck. For the money I paid, I expected more. Seems like a cut rate Chinese product. I would pursue other alternatives.Read All Reviews